Aerospace Die Carrier
This is the redesigned platform for a lift that is used to move press dies about the facility. It was found that the welds were failing and the customer wanted to increase the safety factor to prevent injuries in their plant.
Material Handling
Aerospace Die Lifter
The die lifter is used to pick up the press dies in the facility and be able to separate the two halves for cleaning and inspection. This unit is not only a lifting device, but will also turn the top half of the die over once it is in the air.
CNC Welding Machine
A series of these machines were made for a concrete vault manufacturing company for their vault lids. This is a full 3-axis welding machine.
Lead Wire Press
Designed/Built a lead wire press that is used to make continuous lead wire.
Material Handling Equipment
This automated sorting rack system is designed to feed material to a press for composite material manufacturing.
Tilting Platform
This platform is designed to pitch, roll and yaw to about 3 degrees in all directions to simulate aircraft movement in order to test the locking mechanisms of the cargo storage containers. This was designed, fabricated and installed on the customer's premises. A similar one was made that all of the pieces were able to be brought in through a man-door for installation.